When it comes to raising a house or renovating a pre-existing household, like mounting plates are a piece of necessary equipment. It is essential that the build quality of the product is good and that it can hold the structure firmly. These housing pre-mounting plates are built using a high-end material and are durable. If you are planning to purchase a pre-housing mounting plate, check out our website.
Whether it’s fitting a simple door or any other heavy equipment without proper steel equipments for construction like mounting plates the work will not be complete. They are useful in holding the structure firmly. When it comes to construction, they are essential. If you are planning to buy housing mounting plates, you can visit our website and buy some at an affordable price range.
Housing plates are a type of steel equipment for construction that is very essential for any sort of renovation or building of a house. They are used for mounting purposes therefore it is necessary that you buy good quality housing plates. Braro Industries’ website consists of some of the best quality housing plates. Check out our website and buy at an affordable price range.
Braro industries have some of the best quality steel plates. Housing plates are an important piece of equipment. It is critical that the product has a high build quality and can firmly support the structure. We provide various types of housing plates. Check out our website to know more.
NEW CONSTRUCTION MOUNTING PLATE 3-1/4″ HOUSING
3-1/4″New Construction mounting Plate
Convert your remodel housing to new construction by using a P-3000 pre mounting plate
For use with HV31-HR02-RM remodel housings
General:
Constructed of galvanized steel, this new construction pre-mounting plate with concentric knock-out holes, used to mount 3-¼” housing.
Mounting:
The plate includes mounting holes to satisfy any type of installation. The plate also includes holding brackets for use with hanger bars (RCH507 – sold separately). Alignment notches on the plate to help to align multiple plates.
Description: The P-3500 is a 3-¼” new construction pre-mounting plate with concentric knock-out holes, for use with 3-¼ housing.
IMPORTANT:
Read all instructions before installing the plate. Retain for
future reference.
SAFETY:
Turn the power off at the main fuse/breaker panel before
attempting any electrical work.
INSTALLATION:
1. Remove inner ring when used with HV4-HR02AC-RM and HV41-HR02 housings.
2. Nail-in mounting plate to the ceiling joist with brackets facing up, or use RCH507 hanger bars (sold separately).
3. Install drywall onto the ceiling.
4. Cut out a circle where the mounting plate opening is located.
5. Extend the electrical wires from the power supply through the opening and connect to the housing.
6. Secure housing to the mounting plate with clips.
BR-307 3″ NON-IC CONSTRUCTION HOUSING PLATE
3-Inch New Construction Non-IC mini recessed low voltage housing plate. The non-IC designation requires a 3-inch minimum clearance away from housing. Housing is designed for solid or suspended ceilings and approved for through circuit 90 degrees C wiring. One 50 watts, 12-volt GU5.3 MR16 lamp is required, but not included. Includes thermally protected Class H magnetic transformer mounted to junction box cover for snap on/off convenience. Dimmable with a low voltage magnetic dimmer. 3 7/8 inch ceiling opening.
Housing/Mounting:
Solid housing design stands up to tough installation challenges.
Versatile mounting features provide fast installation.
For solid or suspended ceilings.
BR-407 4″ NON-IC CONSTRUCTION HOUSING PLATE
4-Inch New Construction Non-IC mini recessed low voltage housing plate. The non-IC designation requires a 4-inch minimum clearance away from housing. Housing is designed for solid or suspended ceilings and approved for through circuit 90 degrees C wiring. One 50 watts, 12-volt GU5.3 MR16 lamp is required, but not included. Includes thermally protected Class H magnetic transformer mounted to junction box cover for snap on/off convenience. Dimmable with a low voltage magnetic dimmer. 3 7/8 inch ceiling opening.
Housing/Mounting:
Solid housing design stands up to tough installation challenges.
Versatile mounting features provide fast installation.
For solid or suspended ceilings.
The lamp housing is removable through the ceiling aperture to access the junction box.
J-box has (3) 1/2″ knockouts with spring latch access plates.
Housing adjusts to various ceiling thicknesses with three (3) screws.
Dual extension hanger bars span 15″ – 25-1/4″ with integral holding spikes for easy mounting to wood joists. Hanger bars may also be extended to rest on T-bar ceilings (optional clip-on T-bar hangers available).
